Water Port & Oil Metering Hole Modification
Submitted On: January 3, 2007, 10:00 pm
Many times with doing a swap you’ll open up with an open water port in the rotor housing that you don’t need. And were going to show you how to plug it off and the oil metering holes are not always needed. In some applicants you may not want to plug this water jacket off. Make sure you know if it is alright to plug your holes, we are mainly showing how to do it properly, if you know it needs to be done. This is very simple installation process and can be done within 15 minutes at your home. An 8th inch pipe plug standard off the shelf is used for blocking off the oil metering holes and a freeze plug for the freeze plug holes.
